TAXES INCLUDED: €844.24
Taxes calculated 22%. Pls. keep in mind, taxes vary by country: France taxes will be 20%, in Spain 21% etc., and if you are a company or out EU 0%
B-Medical-Systems passive container of 8 l for the transport of frozen plasma with internal aluminum frame and 5 eutectic plates -32°C (4X0.3 lt + 1X0.6 lt). Transportation hours: 5,30 hours at +43°C outside or >24 hours at -10°C outside. Conformity Medical Device Class IIa according to MDD 93/42/EEC, ADR/RID, IMDG, ICAO-TI/IATA-DGR.
100% secure payments
.png){kind=small}
MT4 BLOOD TRANSPORT BAG
B Medical Systems MT transport bags are medical devices designed for the safe transport of blood or other components.
All MT models are ADR, RID, IMDG, ICAO-TI, IATA-DGR and medical devices compliant according to MDR (EU) 2017/745, Class IIa.
The MT4 are passive transport containers, with a gross volume of 8 litres.
The MT4-ET special versions are equipped with special cooling elements which keep the internal temperature within a specific range. The different cooling elements contained in the four versions of MT4-ET correspond to different temperature ranges, suitable for storing plasma, erythrocytes, platelets or blood samples.
Inside the bag there is also an aluminum container, where to insert, for example, the bags without these directly touching the eutectic plates.
Declarations of conformity in detail:
- ADR/RID European agreements for the transport of dangerous materials by road and railways directive 2008 / 68 / EC, Groups I,II,III.
- IMDG European Agreements for the Carriage of Dangerous Materials by Sea directive 2002 / 84 / EC.
- ICAO-TI/IATA-DGR International agreements for air transport.
- Complies with WHO recommended requirements.
- Conformity Medical Device Class IIa according to MDD 93/42/EEC
.jpg)
ANTIBACTERIAL, ANTICORROSION, SHOCKPROOF
The monobloc structure is made of polyethylene, a practically indestructible plastic material with high mechanical resistance, proven by drop tests. Unaffected by corrosion and therefore also suitable for use in difficult environmental conditions.
The insulation is in thick polyurethane foam, which guarantees the conservation of the original characteristics of the vaccines, blood products, medicines, etc.
Inside the carrying bag there are no corners or inaccessible areas; it can be easily and thoroughly cleaned and disinfected, even with conventional products.
Also perfect in the finishes and details: gaskets on the lid, grooves for perfect stacking, interlocking hinges.
TCO - Total cost of ownership
Before your purchase, we encourage you to consider the total cost of ownership (TCO) of the product.
The B Medical Systems models are generally more expensive than other products on the market and this is because the manufacturer does not make quality compromises.
B Medical Systems designs and builds its products to be durable, reliable and always set new safety standards in the medical field.
The initial cost will be easily compensated by the longer life of the products over the years and by use without worries or problems.
'I like the robustness and safety of the MT4 transport bags (used for the transport of blood components, by courier, to the transfusion units), as they are robust and safe boxes that keep the blood component well preserved'
Dr. Gerardo Calvo Salas
➔ WHAT DO THE EXPERTS THINK? - Laboratorio Clínico Banco de Sangre, Universidad de Costa Rica. Read the full interview (in English) of Dr. Gerardo Calvo Salas, immunohematologist and blood bank specialist at the Clinical Laboratory of the University of Costa Rica (LCBSUCR). In the laboratory, clinical analyzes are performed and high quality blood components are produced for the university community and beyond.
FOR LONG HAUL TRANSPORT - Temperature controlled systems
In the ET versions, MT4 is equipped with PCM (Phase Change Material) systems, cooling or heating elements which will keep the inside of the transport bag in a precise temperature range in every season.
The four temperatures/models available have been designed for the transport of:
Depending on the desired internal temperature, different types of eutectic plates will be used. The difference between the siberinis is clearly visible thanks to the different colors of the internal blend used; therefore, if you use two MTs for different purposes, you cannot fall into error!
Download HERE the page with all the technical details of the four versions of the siberini.
Standard supplied accessories, MT4-ET:
4 cold accumulators of 0.3 liters each.
1 cold accumulator of 0.6 liters each.
1 internal aluminum container
1 carrying strap
2 document holders on the front
nr 1 document holder on the back
.jpg)
(1).jpg)
TEMPERATURE HOLD TEST
Below are briefly reported the data extrapolated from the 'Validation Summary Report' performed by 'Medic One' of Munich in Germany.
The data represent the maintenance of the internal temperature over time depending on the external ambient temperature.
MT 4-ET-32, loaded with 2 bags of GFP-D (frozen plasma).
Test at -10°C: >24 hours.
Test at +22°C: 12.33 h.
Test at +43°C: 5.30 h.
Preconditioning at ≤-40°C for 72 hours
MT 4-ET+4, loaded with 8 bags of EK-D (concentrated erythrocytes).
Test at -10°C: 11.18 h.
Test at +22°C: 18.36 h.
Test at +43°C: 7.33 hours.
Preconditioning at ≤15°C for 72 hours
MT 4-ET+22, loaded with 2 bags of TK-D (platelet concentrate).
Test at -10°C: 2.33 hours.
Test at +43°C: 4.09 hours.
Preconditioning at ≤15°C for 72 hours
MT 4-ET+37, loaded with 10 bags of MonoV-D (EDTA blood samples).
Test at -10°C: 2.08 hours.
Test at +22°C: 15.02 h.
Test at +43°C: 0.46 h
Preconditioning at ≤30°C for 72 hours
Download the complete certificate: Validation summary report DOMETIC MT4B English
Related products
