TAXES INCLUDED: €7,269.25
Taxes calculated 22%. Pls. keep in mind, taxes vary by country: France taxes will be 20%, in Spain 21% etc., and if you are a company or out EU 0%
37 lt counter-top ultra-freezer; adjustable temperature from -20°C...-86°C; control displays; complete battery of alarms; VIP: Vacuum Insulation Panel; USB for downloading recorded data; door lock. Atex conform. Recommended use: laboratory.
100% secure payments
.png){kind=small}
The HUB series allows you to have a powerful ultra freezer, with temperatures down to -86°C, at your fingertips. The new HUB 40 model can be positioned on a high bench, so as to have your samples at a comfortable and ideal height, so as not to interrupt your work processes.
The two most important features of this model are certainly the large touch display and the large ergonomic handle, which will make your routine work in the laboratory simple and efficient.
In addition, it is built with excellent materials, for long-lasting and safe use in your laboratories.
CONSTRUCTION
- Interior in stainless steel
- Exterior in painted steel
- Insulation in polyurethane with cyclopentane with 80mm thickness
EQUIPMENT
- Block
- LED light
- 48 hour controller battery backup
- VIP (vacuum insulated panel)
- Electric perimeter heater
- Ø20mm hole
- Clean contact
- Vacuum valve
- Solid door
- Reversibility of the door
ALARMS
- High/low temperature
- Open door
- Power failure
- Probe failure
CONTROL PANEL
- Control with i-Care, Touch screen
- Temperature graphs
- Data logging, alarms, events
- USB connection
THE NEW TOUCH PANEL
The new control panel of the HUB 40 model, released in 2022, will make your work extremely easy.
The 5-inch touchscreen, with its intuitive icons and easy-to-navigate menus will have you changing settings, extracting data, viewing temperature graphs and more, in a snap.
When you put the freezer into operation for the first time, the on-screen installation process will make it very easy for you to configure the instrument, through pre-set profiles, adapting it to the use you will make of it. It will also provide you with all the main information and usage tips, to use your freezer to the fullest.
.jpg)
ALL THE ADVANTAGES OF THE i-CARE CONTROL PANEL
Real-time data logging and graphing
• Integrated data logging for documentation
• Report extraction via USB
• Real-time temperature graph for a quick overview
Easy to use
• Intuitive icons and menus
• English, French and German language
• 5 inch touchscreen
• Event list for a quick overview of actions
• Factory reset for a clean reboot
• Maintenance schedules
• Predefined profiles for quick configuration of the freezer
• 'Clean screen' mode, to avoid unwanted actions when cleaning the screen
Customizable
It will be possible:
• Modify the alarm parameters such as:
- Range of high/low alarms
- Alarm delay on open door and high/low alarm
- Pre-alarm (visual warning)
- Duration of the alarm
• Change the data displayed on the home page
- Actual temperature
- Set temperature
- Actual temperature and set point
• Choose to display the main temperature or the
probe
• Check the lighting
• ... And more!
Identification and password protection
• Device name
• Password for limited access to parameters
.jpg)
PRECISE AND UNIFORM TEMPERATURE
The HUB models have excellent temperature stability, uniform throughout the compartment and easy recovery if the door is opened.
The temperature variations are better than +1.7/-2.6°C and the VIP insulation (with vacuum panels) maintains the cold over time, protecting your samples and increasing energy efficiency.
PERFORMANCE
- Temperature range: -20 to -86°C
- Uniformity: -/+ 2.5°C
- Stability: 0.5°C
- Time to reach -75°C (with set point of -82°C): 84 minutes
- Keep cold (-82°C to -60°C): 105 minutes
- Recovery of temperature (-75°C) after 1 minute with door open: 20 minutes
- Duty cycle, on/off: 25.7/6.7 minutes
.jpg)
THE BEST TECHNOLOGY
Many ultra freezers come equipped with compressors that have two modes of operation: 100% or 0%, on or off. This system is not very efficient.
The HUB 40 model uses a new technology called 'Adaptive Cooling Technology™'. This cooling technology allows the compressor to be flexible in its operation, adapting to the cooling needs. This allows the HUB 40 model to be less noisy, to consume less energy and to recover the temperature faster after opening the door.
Related products
