Datapoint 16NH

Datapoint 16NH is a small and effective tool that allows you to accurately monitor and record temperature and humidity, even for the transport of delicate products.
Tens of years of experience in the field of physical measurements, have led to the design and creation of this special datalogger, which can record up to 100,000 measurements, which can be automatically exported as PDF files to the PC via USB interface.
To facilitate its use, many features are pre-set such as the measurement interval, set at 5 minutes, but it is possible to download a software for customized configuration, with the possibility to set the memorization interval from 10 seconds to 24 hours.
When the values ​​exceed or fall below certain set ranges, you will be notified by an alarm.
An integrated motion detector records and documents vibrations, for example when moving or opening and closing windows or doors.
The LED will indicate if there have been alarms or anomalies.
The device has maximum and minimum values, as well as an AVG (average measurement) function, a dew point indicator and a time indicator.
The logger is entirely made in Germany, with a factory certificate included.

    - Software for the management of the data or changing settings: Download here

-

-

Main features:

Temperature
Range from -40 to + 70 ° C
Resolution 0.1 ° C,
Accuracy 0.5 ° C (from 0 to 60 ° C) otherwise ± 1 ° C
Humidity
Range from 0 to 100% rh
Resolution 0.1%
Accuracy ± 3% rh (40 to 60%). ± 3.5% (20 to 40% and 60 to 80%) otherwise ± 5%
Areas of application
Health: hospitals, pharmacies, transport of medicines, blood.
Food sector: restaurants, hotels, catering, food industry, food transport.
Other sectors: museums, libraries.

Other technical data

    Memory capacity: 100,000 readings
    Visual and audible alarms if limits are exceeded
    Large LCD display
    Programmable directly or from PC
    Data sampling frequency selectable
    User-programmable audible and visual alarms
    Possibility of wall mounting
    Complete with Windows® compatible software, USB interface and batteries


User interface - Display
The lower status line shows the battery capacity, logger mode and alarm status.
The green LED flashes every 30 seconds during recording.
The red LED is used to display alarms or status messages (battery change etc.). The logger also has an internal buzzer that supports the user interface.

SIMPLE
Remove the instrument from the package, remove the display film and the logger is already preset and ready to start. It can be used immediately without any software!

Energy saving mode for the display
Energy saving modes are activated as standard. The display turns off when no button has been pressed for 2 minutes or the instrument has not been moved. The logger is still active, only the display is turned off.

'Mode' button: EXT, AVG, MIN, MAX
By pressing the 'mode' button you will have the respective measurements: external (EXT), average (AVG), minimum (MIN) and maximum (MAX) of the temperature or humidity values.